Products
Water-based PSA product families
Four families, each tuned to a specific bonding route. Grade selection is confirmed with your substrate and coating line before sampling.
Interior trim lamination
Bonding decorative films, skins and foils to ABS, PP and composite panels for cabin trim parts.
- High initial tack with repositionability
- Resistance to heat ageing and humidity
- Low fogging and low odor grades available
Foam & fabric bonding
For PU foam, non-wovens and textile laminates used in seats, headliners and acoustic parts.
- Soft hand, controlled strike-through
- Spray, roll and blade application
- Compatible with flame-laminate replacement lines
Tapes & labels
Converting grades for double-sided tapes, mounting tapes and industrial labels.
- Balanced peel / shear / tack profile
- Stable die-cutting and release behaviour
- Options for low-temperature application
Protective films
Surface protection during fabrication, transport and assembly, with clean removal.
- Low residue after ageing
- Controlled, stable peel force
- Suitable for painted and glossy surfaces
Technical data
Typical properties
Values are grade-specific and issued in the technical data sheet. The table below shows what is specified for every grade.
| Property | What we specify | Where to find the value |
|---|---|---|
| Solid content | Percent by weight, per grade | TDS / certificate of analysis |
| Viscosity | At a stated temperature and spindle speed | TDS |
| pH | As supplied | TDS |
| 180° peel strength | On a defined substrate after a defined dwell time | TDS / application test report |
| Shear resistance | At a stated temperature and load | TDS |
| VOC / fogging / odor | Measured against a named test method | Emission test report |
| Coating & drying | Recommended coat weight and drying window | Processing guide |
Sampling
From specification to line trial
Send us the substrate, bonding route, coat weight and emission target. We shortlist a grade, provide a sample and the matching documentation, then support the first trial.
What to include in your inquiry
Substrate and surface treatment · Application method · Drying conditions · Target peel / shear performance · Emission or odor standard · Annual volume estimate